Centaur 250 MAX II Archives - Stallions Motor https://www.ridestallions.com/home/en/category/centaur-250-max-ii-en/ Tue, 17 Nov 2020 10:18:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://www.ridestallions.com/home/wp-content/uploads/2023/01/logo_stallions_512-100x100.png Centaur 250 MAX II Archives - Stallions Motor https://www.ridestallions.com/home/en/category/centaur-250-max-ii-en/ 32 32 239979420 Warranty – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/warranty-centaur-250-max-ii/ Mon, 19 Oct 2020 08:23:14 +0000 https://stallionsmotor.com/?p=5358 เงื่อนไขการรับประกันคุณภาพ Quality guarantee terms Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come […]

The post Warranty – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>
เงื่อนไขการรับประกันคุณภาพ
Quality guarantee terms
  1. Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  2. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  3. Guarantee for battery, rear shock absorber and tire for a period of 6 months or a mileage of 5,000 km, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle (Refer the terms of the warranty from the local manufacturer).
  4. When your motorcycle have quality problem. You can go to use the warranty by bringing the motorcycle and the warranty book to the distribution center & service appointed by the company. Your vehicle will be modified, adjusted or replaced with the defective part without charging the price of spare parts and repair wage.
ข้อยกเว้นการรับประกัน
Quality guarantee exceptions
  1. When neglect “Rules for the use of motorcycles in the warranty period” may be reserved for quality assurance. When it was found that the neglect was clear. Which cause problem with the motorcycle.
  2. Modify motorcycle and change to manufacturing standard such as engine, carburetor, injector, controller box, muffler and electrical system.
  3. Damage from repair, adjustment or maintenance, by not conform with the service method specified in the manual.
  4. Damage from the accident and the use of vehicle other than the specify, such as overloading or use the speed exceeding the legal limit or use it for competition.
  5. Fading of vehicle paint, Deterioration of metal surface, Deterioration of rubbers and plastic part and rusting that occur over time.
  6. As consumable or materials that wear according to their service life, such as spark plug, bulb, starter motor brush, various control cable, brake pad, clutch pad, chain sprocket, gasket, hose and rubber part, Air filter, oil seal, dust seal and all kind of lubricant oil.

 

 

Warning !!!

Installation of additional equipment or improper vehicle modifications. May cause an accident injury or possibly death. It also breaches the warranty terms of the company.

The post Warranty – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5358 Position of serial numbers – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/position-of-serial-numbers-centaur-250-max-ii/ Mon, 19 Oct 2020 08:11:31 +0000 https://stallionsmotor.com/?p=5352 A หมายเลขตัวถัง A    Chassis number Chassis number is on the right pipe of chassis. B หมายเลขเครื่องยนต์ B    Engine number Engine number is on the left side of crankcase.   Note Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow […]

The post Position of serial numbers – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>
A หมายเลขตัวถัง
A    Chassis number

Chassis number is on the right pipe of chassis.

B หมายเลขเครื่องยนต์
B    Engine number

Engine number is on the left side of crankcase.

 
Note

Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide you with better service.

The post Position of serial numbers – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5352 Left and Right side view – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/left-and-right-side-view-centaur-250-max-ii/ Mon, 19 Oct 2020 08:02:51 +0000 https://stallionsmotor.com/?p=5342 ① Tail light                 ② Seat                       ③ Fuel tank ④ Headlight                ⑤ Front shock absorber  ⑥ Muffler ⑦ Rear brake pedal     ⑧ Tool box                 ⑨ Rear shock absorber     ⑩ Front turning light    ⑪ Front shield             ⑫ Rear turning light ⑬ Side stand               ⑭ Gear shift lever        ⑮ Horn  

The post Left and Right side view – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>

① Tail light                

② Seat                      

③ Fuel tank

④ Headlight               

⑤ Front shock absorber 

⑥ Muffler

⑦ Rear brake pedal    

⑧ Tool box                

⑨ Rear shock absorber

 

 

⑩ Front turning light   

⑪ Front shield            

⑫ Rear turning light

⑬ Side stand              

⑭ Gear shift lever       

⑮ Horn

 

The post Left and Right side view – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5342 Instrument panel – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/instrument-panel-centaur-250-max-ii/ Mon, 19 Oct 2020 07:53:06 +0000 https://stallionsmotor.com/?p=5335 ① Speedometer     ② Signal light (Neutral) ③ Signal Light (Turning light)                 ④ Gear level indicator ⑤ Fuel level indicator                          ⑥ Odometer ⑦ Signal light (High beam)

The post Instrument panel – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>

① Speedometer    

② Signal light (Neutral)

③ Signal Light (Turning light)                

④ Gear level indicator

⑤ Fuel level indicator                         

⑥ Odometer

⑦ Signal light (High beam)

The post Instrument panel – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5335 Left handlebar switch / Right handlebar switch – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/left-handlebar-switch-right-handlebar-switch-centaur-250-max-ii/ Mon, 19 Oct 2020 06:10:06 +0000 https://stallionsmotor.com/?p=5327 สวิทช์แฮนด์ข้างขวา ① Engine stop switch To start the engine, Move the switch to position To stop the engine, Move the switch to position ② Engine start switch Press the switch for start the engine.   สวิทช์แฮนด์ข้างซ้าย ① Dimmer switch Press the switch to position  For change to high beam. Press the switch to position  For […]

The post Left handlebar switch / Right handlebar switch – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>
สวิทช์แฮนด์ข้างขวา

① Engine stop switch

To start the engine, Move the switch to position

To stop the engine, Move the switch to position

② Engine start switch Press the switch for start the engine.

 

สวิทช์แฮนด์ข้างซ้าย

① Dimmer switch

Press the switch to position  For change to high beam.

Press the switch to position  For change to low beam.

② Turning light switch (Type – Push for cancel)

Move the switch to the direction (Right) The turn signal (Right) will work.

Move the switch to the direction (Left) The turn signal (Left) will work.

Press the switch to the middle area. For turn off the turn signal.

③ Horn switch  Press the horn switch, when the horn signal is to be used.

④ Headlight flashing switch (high beam). Press switch for warning alert.

 

The post Left handlebar switch / Right handlebar switch – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5327 Ignition switch / Tool – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/ignition-switch-tool-centaur-250-max-ii/ Mon, 19 Oct 2020 06:02:19 +0000 https://stallionsmotor.com/?p=5318 ON    : Open the entire electrical system. The key cannot be removed. OFF   : Close the entire electrical system. The key can be removed. LOCK : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to […]

The post Ignition switch / Tool – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>

ON    : Open the entire electrical system. The key cannot be removed.

OFF   : Close the entire electrical system. The key can be removed.

LOCK : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to the lock position, Then pulling the key out.

 

 
Tools set

① Tool packaging

② Wrench No.13 , No.16

③ Wrench No.8 , No.10

④ Spark plug block

⑤ Screwdriver handle

⑥ Two in One screwdriver

⑦ Tool box

The post Ignition switch / Tool – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5318 Battery – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/battery-centaur-250-max-ii/ Mon, 19 Oct 2020 05:56:29 +0000 https://stallionsmotor.com/?p=5312       CENTAUR 250 MAX II Battery capacity 12V 9Ah                  For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life […]

The post Battery – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>

 

 

 

CENTAUR 250 MAX II

Battery capacity

12V 9Ah

                 For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life and make the battery most efficient to use. It is therefore necessary to charge the battery regularly, When the battery voltage is less than 12.5 v.

                In normal driving, The battery will be fully charged by the motorcycle charging system. Whenever you use a motorcycle for a short or very short time, the battery should be recharged. As the battery is self-discharging even though we have turned off the ignition to the OFF position, but with the rising temperature Including the supply of power to various devices causing the battery to discharge electricity continuously.

The post Battery – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5312 Spark plug – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/spark-plug-centaur-250-max-ii/ Mon, 19 Oct 2020 04:48:53 +0000 https://stallionsmotor.com/?p=5302 Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean. Standard spark plug DR8EA   ① Insulation prevents leakage of electric current. ② Spark plug gap distance.     Note   Standard value, spark plug gap distance 0.6 – 0.7 mm.     Carburetor choke lever […]

The post Spark plug – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>

Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean.

Standard spark plug DR8EA

 

① Insulation prevents leakage of electric current.

② Spark plug gap distance.

 

 

Note  

Standard value, spark plug gap distance 0.6 – 0.7 mm.

 

 
Carburetor choke lever
  • If the engine is cold, Pull the carburetor choke lever
  • Make a slight twist of the throttle, Then start the engine until the engine is working.
  • When the engine has sufficient warm-up and able to work in idling, Push the carburetor choke lever  return to the original position.

The post Spark plug – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5302 Driving chain – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/driving-chain-centaur-250-max-ii/ Mon, 19 Oct 2020 04:38:25 +0000 https://stallionsmotor.com/?p=5292   Adjustment of driving chain l  Set the motorcycle upright on a level surface. l  Loosen fixing nut of the rear axle ① and loosen the locking nut ②then tighten the adjusting screw ③ so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side) l  The distance of […]

The post Driving chain – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>
 
Adjustment of driving chain

l  Set the motorcycle upright on a level surface.

l  Loosen fixing nut of the rear axle ① and loosen the locking nut ②then tighten the adjusting screw ③ so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side)

l  The distance of markings on the swing arm ④ must be same on both sides

l  Double check the chain tension, Then tighten nut ② and ①

 

The chain and the sprocket are the parts that move around each other all the time. If there is dirt on the chain, it will wear out the chain and sprocket faster than usual. Should be clean and lubricate chain, Then adjust the chain to the standard distance

 
Note

A     is the slack of the standard distance chain 20 – 30 mm.

The post Driving chain – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5292 Cleaning air filter – CENTAUR 250 MAX II https://www.ridestallions.com/home/en/cleaning-air-filter-centaur-250-max-ii/ Mon, 19 Oct 2020 04:31:10 +0000 https://stallionsmotor.com/?p=5284   Procedure for removing the air filter l  Remove the screw of the air filter cover ① l  Open the air filter cover ② and take out the air filter to clean. l  Blow the airflow from outside to inside follow the arrow.   Warning !!! Do not ride motorcycle without air filter installed. Because […]

The post Cleaning air filter – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]>
 
Procedure for removing the air filter

l  Remove the screw of the air filter cover ①

l  Open the air filter cover ② and take out the air filter to clean.

l  Blow the airflow from outside to inside follow the arrow.

 
Warning !!!

Do not ride motorcycle without air filter installed. Because dirt may have escaped inside the engine and will cause internal engine parts have worn or be damaged

The post Cleaning air filter – CENTAUR 250 MAX II appeared first on Stallions Motor.

]]> 5284