Centaur CT 170i Bobber Customized Archives - Stallions Motor

Warranty – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 09:13:03 +0000

Quality guarantee terms

Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
Guarantee for battery, rear shock absorber and tire for a period of 6 months or a mileage of 5,000 km, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle (Refer the terms of the warranty from the local manufacturer).
When your motorcycle have quality problem. You can go to use the warranty by bringing the motorcycle and the warranty book to the distribution center & service appointed by the company. Your vehicle will be modified, adjusted or replaced with the defective part without charging the price of spare parts and repair wage.

Quality guarantee exceptions

When neglect “Rules for the use of motorcycles in the warranty period” may be reserved for quality assurance. When it was found that the neglect was clear. Which cause problem with the motorcycle.
Modify motorcycle and change to manufacturing standard such as engine, carburetor, injector, controller box, muffler and electrical system.
Damage from repair, adjustment or maintenance, by not conform with the service method specified in the manual.
Damage from the accident and the use of vehicle other than the specify, such as overloading or use the speed exceeding the legal limit or use it for competition.
Fading of vehicle paint, Deterioration of metal surface, Deterioration of rubbers and plastic part and rusting that occur over time.
As consumable or materials that wear according to their service life, such as spark plug, bulb, starter motor brush, various control cable, brake pad, clutch pad, chain sprocket, gasket, hose and rubber part, Air filter, oil seal, dust seal and all kind of lubricant oil.

Warning

Installation of additional equipment or improper vehicle modifications. May cause an accident injury or possibly death. It also breaches the warranty terms of the company.

The post Warranty – CT 170i Bobber appeared first on Stallions Motor.

Position of serial numbers – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 09:02:27 +0000

A Chassis number

Chassis number is on the right pipe of chassis.

B Engine number

Engine number is on the left side of crankcase.

Note

Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide you with better service.

The post Position of serial numbers – CT 170i Bobber appeared first on Stallions Motor.

Left and Right side view – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 08:53:21 +0000

① Tail light

② Seat

③ Fuel tank

④ Headlight

⑤ Front shock absorber

⑥ Muffler

⑦ Rear brake pedal

⑧ Tool box

⑨ Rear shock absorber

⑩ Front turning light

⑪ Speedometer

⑫ Rear turning light

⑬ Side stand

⑭ Gear shift lever

The post Left and Right side view – CT 170i Bobber appeared first on Stallions Motor.

Instrument panel – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 08:37:50 +0000

① Speedometer

② Tachometer

③ FI indicator

④ Neutral gear indicator

⑤ high beam

⑥ turn signal

⑦ Fuel level gauge

⑧ gear status indicator

⑨ Odometer

The post Instrument panel – CT 170i Bobber appeared first on Stallions Motor.

Left handlebar switch / Right handlebar switch – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 08:09:43 +0000

Left handlebar switch

① Dimmer switch

Press the switch to position For change to high beam.

Press the switch to position For change to low beam.

② Headlight flashing switch (high beam). Press switch for warning alert.

③ Turning light switch (Type – Push for cancel)

Move the switch to the direction (Right) The turn signal (Right) will work.

Move the switch to the direction (Left) The turn signal (Left) will work.

Press the switch to the middle area. For turn off the turn signal.

④ Horn switch Press the horn switch, when the horn signal is to be used.

Right handlebar switch

① Engine stop switch

To start the engine, Move the switch to position

To stop the engine, Move the switch to position

② Emergency signal switch / ○

Move the switch to the direction For open emergency signal switch.

Move the switch to the direction ○ For close emergency signal switch.

③ Engine start switch

Press the switch for start the engine.

The post Left handlebar switch / Right handlebar switch – CT 170i Bobber appeared first on Stallions Motor.

Ignition switch – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 06:21:27 +0000

ON : Open the entire electrical system. The key cannot be removed.

OFF : Close the entire electrical system. The key can be removed.

LOCK : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to the lock position, Then pulling the key out.

PARK : car lock position and turn on the lights. For example, the car breaks down. Emergency parking at night. The key can be removed

The post Ignition switch – CT 170i Bobber appeared first on Stallions Motor.

Tool – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 04:27:35 +0000

Tools set

① Tool packaging

② Spark plug block

③ Screwdriver handle

④ Two in One screwdriver

⑤ Tool box

The post Tool – CT 170i Bobber appeared first on Stallions Motor.

Battery – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 04:03:52 +0000

170i
Battery capacity	12V 9Ah

For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life and make the battery most efficient to use. It is therefore necessary to charge the battery regularly, When the battery voltage is less than 12.5 v.

In normal driving, The battery will be fully charged by the motorcycle charging system. Whenever you use a motorcycle for a short or very short time, the battery should be recharged. As the battery is self-discharging even though we have turned off the ignition to the OFF position, but with the rising temperature Including the supply of power to various devices causing the battery to discharge electricity continuously.

The post Battery – CT 170i Bobber appeared first on Stallions Motor.

Spark plug – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 03:45:32 +0000

Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean.

Standard spark plug	CPR6E

Standard spark plug (NGK)	CPR6EA9

① Insulation prevents leakage of electric current.

② Spark plug gap distance.

Note

The standard value of the spark plug gap distance is 0.6 – 0.7 mm.

The post Spark plug – CT 170i Bobber appeared first on Stallions Motor.

Adjustment of accelerator cable / Adjustment of carburetor idle speed – CT 170i Bobber

it thirachet — Sat, 20 Mar 2021 03:38:35 +0000

Standard free distance A = 2 – 6 mm.

Adjust the free distance of accelerator cable

Loosen nut ①
Adjust nut ② to get the free distance as standard.

Tighten nut ①

Adjusting the idle speed

Start the engine and allow it to warm 1 – 2 minute
Adjust the idle speed by turning the screw ① on the carburetor to achieve idle. Meets the standard set

Standard idle speed = 1,400 ±100 r/min

Note : Adjustment screw ①

Turn the screw clockwise = engine idle speed increase.
Turn the screw counterclockwise = engine idle speed decrease.

Caution

Before setting the free throttle cable. To adjust the engine idle speed to the standard first.

The post Adjustment of accelerator cable / Adjustment of carburetor idle speed – CT 170i Bobber appeared first on Stallions Motor.