CT 400 SE (API) Archives - Stallions Motor https://www.ridestallions.com/home/en/category/ct-400-se-api-en/ Tue, 17 Nov 2020 10:30:47 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://www.ridestallions.com/home/wp-content/uploads/2023/01/logo_stallions_512-100x100.png CT 400 SE (API) Archives - Stallions Motor https://www.ridestallions.com/home/en/category/ct-400-se-api-en/ 32 32 239979420 Warranty – CT 400 SE (API) https://www.ridestallions.com/home/en/warranty-ct-400-se-api/ Tue, 20 Oct 2020 07:31:43 +0000 https://stallionsmotor.com/?p=5485 Quality guarantee terms Engine and EFI set (Oxygen sensor, ECU unit, Fuel pump, Injector, Valve body, Other sensor) warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual. Equipment warranty and […]

The post Warranty – CT 400 SE (API) appeared first on Stallions Motor.

]]>
Quality guarantee terms
  1. Engine and EFI set (Oxygen sensor, ECU unit, Fuel pump, Injector, Valve body, Other sensor) warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  2. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  3. Guarantee for battery, rear shock absorber and tire for a period of 6 months or a mileage of 5,000 km, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle (Refer the terms of the warranty from the local manufacturer).
  4. When your motorcycle have quality problem. You can go to use the warranty by bringing the motorcycle and the warranty book to the distribution center & service appointed by the company. Your vehicle will be modified, adjusted or replaced with the defective part without charging the price of spare parts and repair wage.
 
Quality guarantee exceptions
  1. When neglect “Rules for the use of motorcycles in the warranty period” may be reserved for quality assurance. When it was found that the neglect was clear. Which cause problem with the motorcycle.
  2. Modify motorcycle and change to manufacturing standard such as engine, carburetor, injector, controller box, muffler and electrical system.
  3. Damage from repair, adjustment or maintenance, by not conform with the service method specified in the manual.
  4. Damage from the accident and the use of vehicle other than the specify, such as overloading or use the speed exceeding the legal limit or use it for competition.
  5. Fading of vehicle paint, Deterioration of metal surface, Deterioration of rubbers and plastic part and rusting that occur over time.
  6. As consumable or materials that wear according to their service life, such as spark plug, bulb, starter motor brush, various control cable, brake pad, clutch pad, chain sprocket, gasket, hose and rubber part, Air filter, oil seal, dust seal and all kind of lubricant oil.

 

 

Warning !!!

Installation of additional equipment or improper vehicle modifications. May cause an accident injury or possibly death. It also breaches the warranty terms of the company.

The post Warranty – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5485 Position of serial numbers – CT 400 SE (API) https://www.ridestallions.com/home/en/position-of-serial-numbers-ct-400-se-api/ Tue, 20 Oct 2020 07:25:31 +0000 https://stallionsmotor.com/?p=5478       A    Chassis number Chassis number is on the right pipe of chassis.       B    Engine number Engine number is on the left side of crankcase.   Note Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service […]

The post Position of serial numbers – CT 400 SE (API) appeared first on Stallions Motor.

]]>
 
 
 
A    Chassis number

Chassis number is on the right pipe of chassis.

 
 
 
B    Engine number

Engine number is on the left side of crankcase.

 
Note

Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide you with better service.

The post Position of serial numbers – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5478 Overviews – CT 400 SE (API) https://www.ridestallions.com/home/en/overviews-ct-400-se-api/ Tue, 20 Oct 2020 07:15:48 +0000 https://stallionsmotor.com/?p=5470   ① Headlight ② Speedometer ③ Fuel tank ④ Seat           ⑤ Rear shock absorber ⑥ Tail light ⑦ Muffler ⑧ Side stand ⑨ Gear shift lever ⑩ Front shock absorber

The post Overviews – CT 400 SE (API) appeared first on Stallions Motor.

]]>

 

① Headlight

② Speedometer

③ Fuel tank

④ Seat          

⑤ Rear shock absorber

⑥ Tail light

⑦ Muffler

⑧ Side stand

⑨ Gear shift lever

⑩ Front shock absorber

The post Overviews – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5470 Instrument panel – CT 400 SE (API) https://www.ridestallions.com/home/en/instrument-panel-ct-400-se-api/ Tue, 20 Oct 2020 07:10:07 +0000 https://stallionsmotor.com/?p=5464 ① Adjust trip ② Speedometer ③ Odometer ④ Odometer (Trip) ⑤ Tachometer ⑥ Signal light (Fuel level warning) ⑦ Signal light (FAI warning) ⑧ Signal light (Neutral) ⑨ Signal light (High beam) ⑩ Signal Light (Turning light)

The post Instrument panel – CT 400 SE (API) appeared first on Stallions Motor.

]]>

① Adjust trip

② Speedometer

③ Odometer

④ Odometer (Trip)

⑤ Tachometer

⑥ Signal light (Fuel level warning)

⑦ Signal light (FAI warning)

⑧ Signal light (Neutral)

⑨ Signal light (High beam)

⑩ Signal Light (Turning light)

The post Instrument panel – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5464 Right handlebar switch / Left handlebar switch – CT 400 SE (API) https://www.ridestallions.com/home/en/left-handlebar-switch-right-handlebar-switch-ct-400-se-api/ Tue, 20 Oct 2020 06:49:30 +0000 https://stallionsmotor.com/?p=5451 Right handlebar switch ① Engine stop switch To start the engine, Move the switch to position To stop the engine, Move the switch to position ② ON / OFF Headlight switch / ○ Move the switch to the direction  For open the headlight. Move the switch to the direction ○ For close the headlight. ③ […]

The post Right handlebar switch / Left handlebar switch – CT 400 SE (API) appeared first on Stallions Motor.

]]>
 
Right handlebar switch

① Engine stop switch

To start the engine, Move the switch to position

To stop the engine, Move the switch to position

② ON / OFF Headlight switch / ○

Move the switch to the direction  For open the headlight.

Move the switch to the direction ○ For close the headlight.

③ Engine start switch

Press the switch for start the engine.

 

 
Left handlebar switch

① Dimmer switch

Press the switch to position  For change to high beam.

Press the switch to position  For change to low beam.

② Turning light switch (Type – Push for cancel)

Move the switch to the direction (Right) The turn signal (Right) will work.

Move the switch to the direction (Left) The turn signal (Left) will work.

Press the switch to the middle area. For turn off the turn signal.

③ Horn switch  Press the horn switch, when the horn signal is to be used.

④ Headlight flashing switch (high beam). Press switch for warning alert.

The post Right handlebar switch / Left handlebar switch – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5451 Ignition switch / Tool – CT 400 SE (API) https://www.ridestallions.com/home/en/ignition-switch-tool-ct-400-se-api/ Tue, 20 Oct 2020 06:36:44 +0000 https://stallionsmotor.com/?p=5442   Ignition switch ON   : Open the entire electrical system. The key cannot be removed. OFF   : Close the entire electrical system. The key can be removed. LOCK : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF […]

The post Ignition switch / Tool – CT 400 SE (API) appeared first on Stallions Motor.

]]>
 
Ignition switch

ON   : Open the entire electrical system. The key cannot be removed.

OFF   : Close the entire electrical system. The key can be removed.

LOCK : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to the lock position, Then pulling the key out.

 

 
Tools set

① Tool packaging

② Spark plug block

③ Wrench No.14 , No.17

④ Wrench No.10 , No.12

⑤ Wrench No.8 , No.10

⑥ Screwdriver handle

⑦ Two in One screwdriver

The post Ignition switch / Tool – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5442 Battery – CT 400 SE (API) https://www.ridestallions.com/home/en/battery-ct-400-se-api/ Tue, 20 Oct 2020 06:30:41 +0000 https://stallionsmotor.com/?p=5427       CT400 SE (API) Battery capacity 12V 9Ah                    For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life […]

The post Battery – CT 400 SE (API) appeared first on Stallions Motor.

]]>

 

 

 

CT400 SE (API)

Battery capacity

12V 9Ah

     

             For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life and make the battery most efficient to use. It is therefore necessary to charge the battery regularly, When the battery voltage is less than 12.5 v.

             In normal driving, The battery will be fully charged by the motorcycle charging system. Whenever you use a motorcycle for a short or very short time, the battery should be recharged. As the battery is self-discharging even though we have turned off the ignition to the OFF position, but with the rising temperature Including the supply of power to various devices causing the battery to discharge electricity continuously.

The post Battery – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5427 Spark plug – CT 400 SE (API) https://www.ridestallions.com/home/en/spark-plug-adjustment-of-accelerator-cable-ct-400-se-api/ Tue, 20 Oct 2020 06:20:18 +0000 https://stallionsmotor.com/?p=5412 Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean. Standard spark plug DPR8Z         ① Insulation prevents leakage of electric current. ② Spark plug gap distance.   Note Standard value, spark plug gap distance 0.6 – 0.7 mm.

The post Spark plug – CT 400 SE (API) appeared first on Stallions Motor.

]]>

Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean.

Standard spark plug DPR8Z

 

 

 

 

① Insulation prevents leakage of electric current.

② Spark plug gap distance.

 
Note

Standard value, spark plug gap distance 0.6 – 0.7 mm.

The post Spark plug – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5412 Driving chain – CT 400 SE (API) https://www.ridestallions.com/home/en/driving-chain-ct-400-se-api/ Tue, 20 Oct 2020 06:09:01 +0000 https://stallionsmotor.com/?p=5403   Adjustment of driving chain Set the motorcycle upright on a level surface. Loosen fixing nut of the rear axle ① and loosen the locking nut ②then tighten the adjusting screw ③ so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side) The distance of markings on the […]

The post Driving chain – CT 400 SE (API) appeared first on Stallions Motor.

]]>
 
Adjustment of driving chain
  • Set the motorcycle upright on a level surface.
  • Loosen fixing nut of the rear axle ① and loosen the locking nut ②then tighten the adjusting screw ③ so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side)
  • The distance of markings on the swing arm ④ must be same on both sides
  • Double check the chain tension, Then tighten nut ② and ①

 

 

The chain and the sprocket are the parts that move around each other all the time. If there is dirt on the chain, it will wear out the chain and sprocket faster than usual. Should be clean and lubricate chain, Then adjust the chain to the standard distance

 
Note

A    is the slack of the standard distance chain 20 – 30 mm.

The post Driving chain – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5403 Cleaning air filter – CT 400 SE (API) https://www.ridestallions.com/home/en/cleaning-air-filter-ct-400-se-api/ Tue, 20 Oct 2020 05:59:35 +0000 https://stallionsmotor.com/?p=5396   Procedure for removing the air filter Remove the screw of the air filter cover ① Open the air filter cover ② and take out the air filter to clean. Blow the airflow from outside to inside follow the arrow. Warning !!! Do not ride motorcycle without air filter installed. Because dirt may have escaped […]

The post Cleaning air filter – CT 400 SE (API) appeared first on Stallions Motor.

]]>
 
Procedure for removing the air filter
  • Remove the screw of the air filter cover ①
  • Open the air filter cover ② and take out the air filter to clean.
  • Blow the airflow from outside to inside follow the arrow.
Warning !!!

Do not ride motorcycle without air filter installed. Because dirt may have escaped inside the engine and will cause internal engine parts have worn or be damaged

The post Cleaning air filter – CT 400 SE (API) appeared first on Stallions Motor.

]]> 5396