Makina 250 Dual Tracker Archives - Stallions Motor https://www.ridestallions.com/home/en/category/makina-250-dual-tracker-en/ Thu, 10 Dec 2020 08:16:45 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://www.ridestallions.com/home/wp-content/uploads/2023/01/logo_stallions_512-100x100.png Makina 250 Dual Tracker Archives - Stallions Motor https://www.ridestallions.com/home/en/category/makina-250-dual-tracker-en/ 32 32 239979420 Warranty – MAKINA 250 https://www.ridestallions.com/home/en/warranty-makina-250/ Tue, 20 Oct 2020 04:05:58 +0000 https://stallionsmotor.com/?p=4612 Quality guarantee terms Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. […]

The post Warranty – MAKINA 250 appeared first on Stallions Motor.

]]>
Quality guarantee terms
  1. Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  2. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  3. Guarantee for battery, rear shock absorber and tire for a period of 6 months or a mileage of 5,000 km, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle (Refer the terms of the warranty from the local manufacturer).
  4. When your motorcycle have quality problem. You can go to use the warranty by bringing the motorcycle and the warranty book to the distribution center & service appointed by the company. Your vehicle will be modified, adjusted or replaced with the defective part without charging the price of spare parts and repair wage.
 
Quality guarantee exceptions
  1. When neglect “Rules for the use of motorcycles in the warranty period” may be reserved for quality assurance. When it was found that the neglect was clear. Which cause problem with the motorcycle.
  2. Modify motorcycle and change to manufacturing standard such as engine, carburetor, injector, controller box, muffler and electrical system.
  3. Damage from repair, adjustment or maintenance, by not conform with the service method specified in the manual.
  4. Damage from the accident and the use of vehicle other than the specify, such as overloading or use the speed exceeding the legal limit or use it for competition.
  5. Fading of vehicle paint, Deterioration of metal surface, Deterioration of rubbers and plastic part and rusting that occur over time.
  6. As consumable or materials that wear according to their service life, such as spark plug, bulb, starter motor brush, various control cable, brake pad, clutch pad, chain sprocket, gasket, hose and rubber part, Air filter, oil seal, dust seal and all kind of lubricant oil.

 

 

Warning

Installation of additional equipment or improper vehicle modifications. May cause an accident injury or possibly death. It also breaches the warranty terms of the company.

The post Warranty – MAKINA 250 appeared first on Stallions Motor.

]]> 4612 Position of serial numbers – MAKINA 250 https://www.ridestallions.com/home/en/position-of-serial-numbers-makina-250/ Tue, 20 Oct 2020 03:58:39 +0000 https://stallionsmotor.com/?p=4696   A    Chassis number Chassis number is on the right pipe of chassis. B    Engine number Engine number is on the left side of crankcase. Note Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide […]

The post Position of serial numbers – MAKINA 250 appeared first on Stallions Motor.

]]>
  A    Chassis number

Chassis number is on the right pipe of chassis.

 

 

B    Engine number

Engine number is on the left side of crankcase.

 
Note

Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide you with better service.

The post Position of serial numbers – MAKINA 250 appeared first on Stallions Motor.

]]> 4696 Left and Right side view – MAKINA 250 https://www.ridestallions.com/home/en/left-and-right-side-view-makina-250/ Tue, 20 Oct 2020 03:48:44 +0000 https://stallionsmotor.com/?p=4688     ① Tail light                  ② Seat                       ③ Fuel tank ④ Headlight                ⑤ Front shock absorber ⑥ Horn ⑦ Muffler                    ⑧ Rear brake pedal            ⑨ Rear shock absorber         ⑩ Front turning light    ⑪ Speedometer            ⑫ Rear mirror ⑬ Rear turning light      ⑭ Gear shift lever            ⑮ Side stand

The post Left and Right side view – MAKINA 250 appeared first on Stallions Motor.

]]>

 

 

① Tail light                 

② Seat                      

③ Fuel tank

④ Headlight               

⑤ Front shock absorber

⑥ Horn

⑦ Muffler                   

⑧ Rear brake pedal           

⑨ Rear shock absorber

 

 

 

 

⑩ Front turning light   

⑪ Speedometer           

⑫ Rear mirror

⑬ Rear turning light     

⑭ Gear shift lever           

⑮ Side stand

The post Left and Right side view – MAKINA 250 appeared first on Stallions Motor.

]]> 4688 Instrument panel – MAKINA 250 https://www.ridestallions.com/home/en/instrument-panel-makina-250/ Tue, 20 Oct 2020 03:44:14 +0000 https://stallionsmotor.com/?p=4681     ① Signal light (High beam)                      ② Speedometer ③ Signal light (Neutral)                          ④ Signal Light (Turning light) ⑤ Signal light (Fuel level warning)           ⑥ LCD Screen         Press the button ⑦ (on the bottom of the meter) once to show odometer ⑧ or trip distance ⑨ (Press and hold the […]

The post Instrument panel – MAKINA 250 appeared first on Stallions Motor.

]]>

 

 

① Signal light (High beam)                    

 ② Speedometer

③ Signal light (Neutral)                         

④ Signal Light (Turning light)

⑤ Signal light (Fuel level warning)          

⑥ LCD Screen

 

 

 

 

Press the button ⑦ (on the bottom of the meter) once to show odometer ⑧ or trip distance ⑨ (Press and hold the ⑦ button to reset the trip distance)

Within the LCD screen is showing the fuel level inside the tank. ⑩

The post Instrument panel – MAKINA 250 appeared first on Stallions Motor.

]]> 4681 Left handlebar switch / Right handlebar switch – MAKINA 250 https://www.ridestallions.com/home/en/left-handlebar-switch-right-handlebar-switch-makina-250/ Tue, 20 Oct 2020 03:24:07 +0000 https://stallionsmotor.com/?p=4676 Right handlebar switch ① Engine stop switch To start the engine, Move the switch to position  To stop the engine, Move the switch to position  ② Engine start switch        Left handlebar switch   ① Dimmer switch Press the switch to position   For change to high beam. Press the switch to position […]

The post Left handlebar switch / Right handlebar switch – MAKINA 250 appeared first on Stallions Motor.

]]>
Right handlebar switch

① Engine stop switch

To start the engine, Move the switch to position 

To stop the engine, Move the switch to position 

② Engine start switch 

 

 

 
Left handlebar switch

 

① Dimmer switch

Press the switch to position   For change to high beam.

Press the switch to position   For change to low beam.

② Turning light switch (Type – Push for cancel)

Move the switch to the direction (Right) The turn signal (Right) will work.

Move the switch to the direction (Left) The turn signal (Left) will work.

Press the switch to the middle area. For turn off the turn signal.

③ Horn switch   Press the horn switch, when the horn signal is to be used.

④ Headlight flashing switch (high beam). Press switch for warning alert.

 

The post Left handlebar switch / Right handlebar switch – MAKINA 250 appeared first on Stallions Motor.

]]> 4676 Ignition switch / Tool – MAKINA 250 https://www.ridestallions.com/home/en/ignition-switch-tool-makina-250/ Tue, 20 Oct 2020 03:11:14 +0000 https://stallionsmotor.com/?p=4672 Ignition switch ON : Open the entire electrical system. The key cannot be removed. OFF  : Close the entire electrical system. The key can be removed. LOCK  : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position […]

The post Ignition switch / Tool – MAKINA 250 appeared first on Stallions Motor.

]]>
Ignition switch

ON : Open the entire electrical system. The key cannot be removed.

OFF  : Close the entire electrical system. The key can be removed.

LOCK  : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to the lock position, Then pulling the key out.

 

 
Tools set

 

① Spark plug block

② Wrench No.10 , No.12

③ Wrench No.14 , No.17

④ Two in One screwdriver

⑤ Screwdriver handle

 
Caution

To clean up Should bring a car manual And tools from the car first in order to prevent damage

The post Ignition switch / Tool – MAKINA 250 appeared first on Stallions Motor.

]]> 4672 Battery – MAKINA 250 https://www.ridestallions.com/home/en/battery-makina-250/ Tue, 20 Oct 2020 03:04:49 +0000 https://stallionsmotor.com/?p=4668 Use the key to unlock 1 to open the right door. Will find 2 batteries in the area   For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life […]

The post Battery – MAKINA 250 appeared first on Stallions Motor.

]]>

Use the key to unlock 1 to open the right door.

Will find 2 batteries in the area

 

For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life and make the battery most efficient to use. It is therefore necessary to charge the battery regularly, When the battery voltage is less than 12.5 v.

In normal driving, The battery will be fully charged by the motorcycle charging

Remove the screw on the right cover, Then open the right cover. Will found the battery inside.

MAKINA 250 DUAL

Battery capacity

12V 7Ah

 

 

The post Battery – MAKINA 250 appeared first on Stallions Motor.

]]> 4668 Spark plug – MAKINA 250 https://www.ridestallions.com/home/en/spark-plug-makina-250/ Tue, 20 Oct 2020 02:49:02 +0000 https://stallionsmotor.com/?p=4663 Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean. Standard spark plug D8TC ① Insulation prevents leakage of electric current. ② Spark plug gap distance.   note Standard value Spark plug gap distance 0.6 – 0.7 mm. https://www.youtube.com/watch?v=-xGY24gucNI&t=5s

The post Spark plug – MAKINA 250 appeared first on Stallions Motor.

]]>

Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean.

Standard spark plug D8TC

① Insulation prevents leakage of electric current.

② Spark plug gap distance.

 
note

Standard value Spark plug gap distance 0.6 – 0.7 mm.

The post Spark plug – MAKINA 250 appeared first on Stallions Motor.

]]> 4663 Driving chain – MAKINA 250 https://www.ridestallions.com/home/en/driving-chain-makina-250/ Tue, 20 Oct 2020 02:41:16 +0000 https://stallionsmotor.com/?p=4658     Adjustment of driving chain Set the motorcycle upright on a level surface. Loosen fixing nut of the rear axle ①then tighten the adjusting screw ②so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side) The distance of markings on the swing arm ③ must be same […]

The post Driving chain – MAKINA 250 appeared first on Stallions Motor.

]]>

 

 
Adjustment of driving chain
  • Set the motorcycle upright on a level surface.
  • Loosen fixing nut of the rear axle ①then tighten the adjusting screw ②so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side)
  • The distance of markings on the swing arm ③ must be same on both sides
  • Double check the chain tension, Then tighten nut ①

 

The chain and the sprocket are the parts that move around each other all the time. If there is dirt on the chain, it will wear out the chain and sprocket faster than usual. Should be clean and lubricate chain, Then

 
Note
  • A   is the slack of the standard distance chain 20 – 30 mm.

The post Driving chain – MAKINA 250 appeared first on Stallions Motor.

]]> 4658 Cleaning air filter – MAKINA 250 https://www.ridestallions.com/home/en/cleaning-air-filter-makina-250/ Tue, 20 Oct 2020 02:33:42 +0000 https://stallionsmotor.com/?p=4654 Procedure for removing the air filter Remove the screw on the left cover ①, Then open the left cover. Remove the screw of the air filter cover ② Open the air filter cover and take out the air filter to clean. Blow the airflow from outside to   Warning Do not ride motorcycle without air […]

The post Cleaning air filter – MAKINA 250 appeared first on Stallions Motor.

]]>
Procedure for removing the air filter
  • Remove the screw on the left cover ①, Then open the left cover.
  • Remove the screw of the air filter cover ②
  • Open the air filter cover and take out the air filter to clean.
  • Blow the airflow from outside to

 

Warning

Do not ride motorcycle without air filter installed. Because dirt may have escaped inside the engine and will cause internal engine parts have worn or be damaged

The post Cleaning air filter – MAKINA 250 appeared first on Stallions Motor.

]]> 4654