SM 150 Archives - Stallions Motor https://www.ridestallions.com/home/en/category/sm-150-en/ Wed, 24 Nov 2021 20:57:02 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://www.ridestallions.com/home/wp-content/uploads/2023/01/logo_stallions_512-100x100.png SM 150 Archives - Stallions Motor https://www.ridestallions.com/home/en/category/sm-150-en/ 32 32 239979420 Warranty – SM 150 https://www.ridestallions.com/home/en/warranty-sm-150/ Tue, 06 Oct 2020 16:09:33 +0000 https://stallionsmotor.com/?p=4775 Quality guarantee terms Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. […]

The post Warranty – SM 150 appeared first on Stallions Motor.

]]>
Quality guarantee terms
  1. Engine warranty at a mileage of 30,000 kilometers or 3 years, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  2. Equipment warranty and external parts at a mileage of 10,000 kilometers or 1 year, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle. Refer the warranty date specified in the owner’s manual.
  3. Guarantee for battery, rear shock absorber and tire for a period of 6 months or a mileage of 5,000 km, whichever come first. Quality guarantee is valid from the date of purchase of the vehicle (Refer the terms of the warranty from the local manufacturer).
  4. When your motorcycle have quality problem. You can go to use the warranty by bringing the motorcycle and the warranty book to the distribution center & service appointed by the company. Your vehicle will be modified, adjusted or replaced with the defective part without charging the price of spare parts and repair wage.

 

Quality guarantee exceptions
  1. When neglect “Rules for the use of motorcycles in the warranty period” may be reserved for quality assurance. When it was found that the neglect was clear. Which cause problem with the motorcycle.
  2. Modify motorcycle and change to manufacturing standard such as engine, carburetor, injector, controller box, muffler and electrical system.
  3. Damage from repair, adjustment or maintenance, by not conform with the service method specified in the manual.
  4. Damage from the accident and the use of vehicle other than the specify, such as overloading or use the speed exceeding the legal limit or use it for competition.
  5. Fading of vehicle paint, Deterioration of metal surface, Deterioration of rubbers and plastic part and rusting that occur over time.
  6. As consumable or materials that wear according to their service life, such as spark plug, bulb, starter motor brush, various control cable, brake pad, clutch pad, chain sprocket, gasket, hose and rubber part, Air filter, oil seal, dust seal and all kind of lubricant oil.

 

 

 

Warning

Installation of additional equipment or improper vehicle modifications. May cause an accident injury or possibly death. It also breaches the warranty terms of the company.

The post Warranty – SM 150 appeared first on Stallions Motor.

]]> 4775 Position of serial numbers – SM 150 https://www.ridestallions.com/home/en/position-of-serial-numbers-sm-150/ Tue, 06 Oct 2020 16:04:02 +0000 https://stallionsmotor.com/?p=4770  A    Chassis number     Chassis number is on the right pipe of chassis. B    Engine number Engine number is on the left side of crankcase. Note Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide […]

The post Position of serial numbers – SM 150 appeared first on Stallions Motor.

]]>
 A    Chassis number

    Chassis number is on the right pipe of chassis.

 

B    Engine number

Engine number is on the left side of crankcase.

 

Note

Chassis number and Engine number is necessary for registration of your motorcycle. Such numbers are needed with order component or service to allow the distributor to provide you with better service.

The post Position of serial numbers – SM 150 appeared first on Stallions Motor.

]]> 4770 Left and Right side view – SM 150 https://www.ridestallions.com/home/en/left-and-right-side-view-sm-150/ Tue, 06 Oct 2020 15:55:13 +0000 https://stallionsmotor.com/?p=4766 ① Tail light ② Seat ③ Fuel tank ④ Headlight ⑤ Front shock absorber ⑥ Muffler ⑦ Rear brake pedal ⑧ Tool box ⑨ Rear shock absorber ⑩ Front turning light ⑪ Speedometer ⑫ Rear turning light ⑬ Side stand ⑭ Gear shift lever ⑮ Horn

The post Left and Right side view – SM 150 appeared first on Stallions Motor.

]]>

 

 

① Tail light                 

② Seat                      

③ Fuel tank

④ Headlight               

⑤ Front shock absorber

⑥ Muffler

⑦ Rear brake pedal     

⑧ Tool box                

⑨ Rear shock absorber

 

 

 

 

⑩ Front turning light   

⑪ Speedometer           

⑫ Rear turning light

⑬ Side stand              

⑭ Gear shift lever           

⑮ Horn

The post Left and Right side view – SM 150 appeared first on Stallions Motor.

]]> 4766 Instrument panel – SM 150 https://www.ridestallions.com/home/en/instrument-panel-sm-150/ Tue, 06 Oct 2020 15:50:26 +0000 https://stallionsmotor.com/?p=4762     ① Speedometer ② Odometer ③ Tachometer ④ Signal light (Fuel level warning) ⑤ Signal light (Neutral) ⑥ Signal Light (Turning light – right) ⑦ Signal light (High beam) ⑧ Signal Light (Turning light – Left)     https://youtu.be/43FL9WUDXis

The post Instrument panel – SM 150 appeared first on Stallions Motor.

]]>

 

 

① Speedometer

② Odometer

③ Tachometer

④ Signal light (Fuel level warning)

⑤ Signal light (Neutral)

⑥ Signal Light (Turning light – right)

⑦ Signal light (High beam)

⑧ Signal Light (Turning light – Left)

 

 

The post Instrument panel – SM 150 appeared first on Stallions Motor.

]]> 4762 Left handlebar switch / Right handlebar switch – SM 150 https://www.ridestallions.com/home/en/left-handlebar-switch-right-handlebar-switch-sm-150/ Tue, 06 Oct 2020 14:39:37 +0000 https://stallionsmotor.com/?p=4757   Left handlebar switch ① Dimmer switch Press the switch to position   For change to high beam. Press the switch to position  For change to low beam. ② Headlight flashing switch (high beam). Press switch for warning alert. ③ Turning light switch (Type – Push for cancel) Move the switch to the direction (Right) The […]

The post Left handlebar switch / Right handlebar switch – SM 150 appeared first on Stallions Motor.

]]>
 
Left handlebar switch

① Dimmer switch

Press the switch to position   For change to high beam.

Press the switch to position  For change to low beam.

② Headlight flashing switch (high beam). Press switch for warning alert.

③ Turning light switch (Type – Push for cancel)

Move the switch to the direction (Right) The turn signal (Right) will work.

Move the switch to the direction (Left) The turn signal (Left) will work.

Press the switch to the middle area. For turn off the turn signal.

④ Horn switch    Press the horn switch, when the horn signal is to be used.

 

 
Right handlebar switch

① Engine stop switch

To start the engine, Move the switch to position 

To stop the engine, Move the switch to position 

② Emergency signal switch  / ○

Move the switch to the direction  For open emergency signal switch.

Move the switch to the direction ○ For close emergency signal switch.

③ Engine start switch 

Press the switch for start the engine.

 

The post Left handlebar switch / Right handlebar switch – SM 150 appeared first on Stallions Motor.

]]> 4757 Ignition switch / Tool – SM 150 https://www.ridestallions.com/home/en/ignition-switch-tool-sm-150/ Tue, 06 Oct 2020 14:08:44 +0000 https://stallionsmotor.com/?p=4753   ON  : Open the entire electrical system. The key cannot be removed. OFF  : Close the entire electrical system. The key can be removed. LOCK  : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to […]

The post Ignition switch / Tool – SM 150 appeared first on Stallions Motor.

]]>

 

ON  : Open the entire electrical system. The key cannot be removed.

OFF  : Close the entire electrical system. The key can be removed.

LOCK  : Lock steering handlebar. Turn the steering handlebar all the way to the left, Then press the key a little and twisting the key from the OFF position to the lock position, Then pulling the key out.

 

 
Tools set                     

① Tool packaging                    

② Spark plug block

③ Screwdriver handle  

④ Two in One screwdriver           

⑤ Tool box

The post Ignition switch / Tool – SM 150 appeared first on Stallions Motor.

]]> 4753 Battery – SM 150 https://www.ridestallions.com/home/en/battery-sm-150/ Tue, 06 Oct 2020 13:51:51 +0000 https://stallionsmotor.com/?p=4747 For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life and make the battery most efficient to use. It is therefore necessary to charge the battery regularly, When the […]

The post Battery – SM 150 appeared first on Stallions Motor.

]]>

 

For the battery attached to the motorcycle. It is a semi-dry battery. The battery of this type is filled with electrolyte and charge it from the battery manufacturer factory However, in order to extend the life and make the battery most efficient to use. It is therefore necessary to charge the battery regularly, When the battery voltage is less than 12.5 v.

In normal driving, The battery will be fully charged by the motorcycle charging system. Whenever you use a motorcycle for a short or very short time, the battery should be recharged. As the battery is self-discharging even though we have turned off the ignition to the OFF position, but with the rising temperature Including the supply of power to various devices causing the battery to discharge electricity continuously.

 

SM150
Battery capacity
12V 9Ah

The post Battery – SM 150 appeared first on Stallions Motor.

]]> 4747 Spark plug – SM 150 https://www.ridestallions.com/home/en/spark-plug-sm-150/ Tue, 06 Oct 2020 05:56:24 +0000 https://stallionsmotor.com/?p=4739   Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean.   Standard spark plug CPR6E   ① Insulation prevents leakage of electric current. ② Spark plug gap distance.   Note The standard value of the spark plug gap distance is 0.6 – 0.7 mm. […]

The post Spark plug – SM 150 appeared first on Stallions Motor.

]]>

 

Remove the spark plug and clean it. According to the maintenance schedule by using a small wire brush scrub clean.

 

Standard spark plug CPR6E

 

① Insulation prevents leakage of electric current.

② Spark plug gap distance.

 

Note

The standard value of the spark plug gap distance is 0.6 – 0.7 mm.

 

 

 
Carburetor choke lever
  • If the engine is cold, Push up the carburetor choke lever (In the direction of the arrow)
  • Make a slight twist of the throttle, Then start the engine until the engine is working.
  • When the engine has sufficient warm-up and able to work in idling, Push down the carburetor choke lever (In the direction of the arrow) return to the original position.

The post Spark plug – SM 150 appeared first on Stallions Motor.

]]> 4739 Driving chain – SM 150 https://www.ridestallions.com/home/en/driving-chain-sm-150/ Tue, 06 Oct 2020 05:45:48 +0000 https://stallionsmotor.com/?p=4735 Adjustment of driving chain Set the motorcycle upright on a level surface. Loosen fixing nut of the rear axle ① and loosen the locking nut ②then tighten the adjusting screw ③ so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side) The distance of markings on the swing […]

The post Driving chain – SM 150 appeared first on Stallions Motor.

]]>
 
 
Adjustment of driving chain
  • Set the motorcycle upright on a level surface.
  • Loosen fixing nut of the rear axle ① and loosen the locking nut ②then tighten the adjusting screw ③ so that the chain slack is 20 – 30 mm. (tighten the adjustment screw same both side)
  • The distance of markings on the swing arm ④ must be same on both sides

 

 

 

The chain and the sprocket are the parts that move around each other all the time. If there is dirt on the chain, it will wear out the chain and sprocket faster than usual. Should be clean and lubricate chain, Then

 

Note

A    is the slack of the standard distance chain 20 – 30 mm.

The post Driving chain – SM 150 appeared first on Stallions Motor.

]]> 4735 Cleaning air filter – SM 150 https://www.ridestallions.com/home/en/cleaning-air-filter-sm-150/ Tue, 06 Oct 2020 05:42:06 +0000 https://stallionsmotor.com/?p=4731 Procedure for removing the air filter Remove the screw of the air filter cover ① Open the air filter cover ② and take out the air filter to clean. Blow the airflow from outside to inside follow the arrow. Warning Do not ride motorcycle without air filter installed. Because dirt may have escaped inside the […]

The post Cleaning air filter – SM 150 appeared first on Stallions Motor.

]]>
 
Procedure for removing the air filter
  • Remove the screw of the air filter cover ①
  • Open the air filter cover ② and take out the air filter to clean.
  • Blow the airflow from outside to inside follow the arrow.

 

Warning

Do not ride motorcycle without air filter installed. Because dirt may have escaped inside the engine and will cause internal engine parts have worn or be damaged

The post Cleaning air filter – SM 150 appeared first on Stallions Motor.

]]> 4731